Trantec S5.5BTX Beltpack Radio Microphone Transmitter
Code: 485BTXG1
Quantity Pricing
Choose quantity
Please allow 3 or 4 working days for dispatch of this product
Description
S5.5BTX Beltpack Transmitter with 4
pin mini XLR connector
S5.5 System features:
- Up to 24 simultaneous channels of true diversity operation
- USB based computer monitoring
- Simple programming of transmitters via Infra-red
- Credit card size beltpack transmitter
- 4 pin mini XLR beltpack connector
- Single AA transmitter battery life of over 10 hours
- Microphone of your choice need to be ordered separately
- Improved stronger belt clip
The S5.5 is an advanced UHF system that allows you to simultaneously operate up to 24 channels per frequency band and all this at a price-performance ratio that you will find hard to match.
The professional bodypack transmitters of the S5.5 system leave absolutely nothing to be desired. Due to their ultra-compact metal housing they can be used in almost any situation – be it for tough live performances on stage or in film and television applications, attached to a guitar strap or hidden under wardrobe. The S5.5-BTX always cuts a good figure.
It comes with LCD screen, battery status LED, detachable antenna, infrared sync, 10-step gain, belt clip, etc.
It provides 1,400 frequencies, 24 of which can be operated simultaneously in a multi-channel setup.
Instruments, headset or lavalier microphones can be connected securely via reliably locking mini-XLR connectors (TA4).
The transmitter uses a single AA battery for about 10 hours of continuous use.
This radio microphone system requires an appropriate operating licence.
Trantec product code: S5.5-BTX2-EBWG1QO
Details
Technical Specifications
S5.5 System Specification
| Frequency Bands available | GI 606-638MHz |
| RF Switching BW | 36MHz typical |
| RF grid spacing | 25kHz |
| RF Bandwidth | < 200kHz |
| AF Frequency response | 60Hz - 20kHz |
| AF Distortion | < 0.8% at nom deviation 22kHz |
| AF Dynamic range | >110dBA |
| AF Noise Reduction | Trantec Proprietary |
| Temperature Range | -10ºC to +55ºC |
S5.5 RX Receiver
| Type | Dual Diversity featuring PLL Dual conversion receivers |
| IF Freq | 1st IF 55.875MHz/2nd IF 10.7MHz |
| Sensitivity | < 1uV/12dB SINAD |
| Squelch Sensitivity | 6 - 36dBuV |
| Tone Frequency | 32.768kHz |
| 1st Image | >70dB |
| RSSI range | 10 steps 30dB range |
| Antenna Inputs/Outputs | BNC 50 Ohms |
| AF Switches | Low Cut - High Boost - Phase Reversal |
| AF Output level | XLR Line + 15dBm max. /XLR Mic -25dBm max. |
| Antenna Phantom | 9V @ 60mA short circuit protected on each RF port |
| Bank Specification | 10 Banks x 24 Channels |
| Infra-Red Link | Range 15 cm max |
| Computer Interface | Computer monitoring via rear panel USB interface |
| Power Consumption | 300mA @ 12Vdc nominal |
S5.5 Transmitters
S5.5-HDX Handheld and S5.5-BTX Beltpack
| Power Supply | Single Alkaline AA cell 1.5V |
| Power Consumption | Typically 120mA |
| Handheld Microphone Element | Dynamic mic, hyper cardioid |
| Beltpack Microphone Element | Electret condenser mic |
| Operating Time | Typically 8-10hrs minimum |
| RF Carrier Power | < 50mW |
| Maximum Input Level | 146dB SPL |
| Controls | On-Off, AF Gain Adjust, Frequency Adjust, AF Mute (Handheld) |
| Gain Range | Handheld: 6 steps 6dB/Beltpack: +2dBm to -20dBm in 10 steps |
| Handheld dimensions | 32 x 250 mm (1.26” x 9.84”). Grille diameter 51mm. Weight 350g (0.77 lb) |
| Beltpack dimensions | 55 x 80 x 20mm (2.17” x 3.15” x 0.79”). Weight 110g. Enhanced clip |
| Handheld Capsules | Replaceable Dynamic/Condenser |
Help Centre
